Is there an existing issue for this problem?
Snapmaker_Orca Version
2.3.6
Operating System (OS)
Windows
OS Version
Win 11
Additional system information
No response
Printer
Snapmaker U1 FW 1.6.0
How to reproduce
I have made the following settings in orca slicer while printing Anycubic ASA that the recerculation should be 15% while printing and 50% after printing,
vespa_scharnier.zip
Anycubic ASA @U1 0.4 nozzle.zip
Actual results
however the display and the fluid applcation and orca slicer (at device) are showing recirculation 60% . This will cause warping at it best Is this a bug?
Expected results
Receiculation fan speed as set on orca slice
Project file & Debug log uploads
Anycubic ASA @U1 0.4 nozzle.zip
vespa_scharnier.zip
Checklist of files to include
Anything else?
No response
Is there an existing issue for this problem?
Snapmaker_Orca Version
2.3.6
Operating System (OS)
Windows
OS Version
Win 11
Additional system information
No response
Printer
Snapmaker U1 FW 1.6.0
How to reproduce
I have made the following settings in orca slicer while printing Anycubic ASA that the recerculation should be 15% while printing and 50% after printing,
vespa_scharnier.zip
Anycubic ASA @U1 0.4 nozzle.zip
Actual results
however the display and the fluid applcation and orca slicer (at device) are showing recirculation 60% . This will cause warping at it best Is this a bug?
Expected results
Receiculation fan speed as set on orca slice
Project file & Debug log uploads
Anycubic ASA @U1 0.4 nozzle.zip
vespa_scharnier.zip
Checklist of files to include
Anything else?
No response