Turn Ribbed Prime Tower 90 Degrees

[Miriax]

Is there an existing issue for this feature request?

• I have searched the existing issues

Is your feature request related to a problem?

The ribs on the ribbed Cone version of the prime tower face the Y axis, but the priming motion is 95% on the X axis.

Which printers will be beneficial to this feature?

All

Describe the solution you'd like

Turning the cone's ribs sideways would prevent the sideways motions from knocking over the tower.

Describe alternatives you've considered

1. Disable the prime tower and put my own manual objects for priming onto the build plate

Additional context

I've repeatedly had a prime tower knock over at about 200mm of height, ruining multi-day long prints. It knocks over along the X axis, where the ribs are not supporting.

[Miriax]

I have found a way to make custom prime towers:

1. load in objects that are as tall as your print.
2. Put the objects first in the print order.
3. Under Global -> Others ->Intra-Layer Order -> As object list

[fire2wind]

May be you could try to use rib tower or change the prime tower width to solve this problem.
Additionally, is the X-axis length of your prime tower much greater than the Y-axis length? If possible, could you please provide the 3mf file?